Sheet piles are one of the most important elements in any construction project. The experts use these components in constructing in-ground structures, retaining walls and marine projects. Then these do not work in projects if you do not drive these correctly. If anything goes wrong, you may have to do expensive repairs which can extend the cost of making steel sheet piling.
However, we have shared a few important tips so that your technical team can install the products correctly. But remember that project requirements, contractor’s methods and conditions may vary from project to project.
- Take Preparation
First of all, you should check the soil before installing the sheet piles. The soil is an important element here which must be checked. The hard soil goes well with shorter piles while the softer soil is good for installing longer sheet piles. In addition to this, you also need to check the pile-driving condition to see if the materials and equipment do the job correctly.
- Use the Appropriate Steel Template
The experts use steel templates to set and drive the piles. You should align every pile correctly during the setting phase. The steel templates must be of robust construction of aligning the heavy sheet piles. As the templates would be used numerous times, therefore, it must be made of strong elements to prevent any type of damage.
- Mark the Templates
You should mark the templates to be sure of which template hoes with which sets of the sheet for maintaining the laying width with the sheet piles. As a result, the contractor can track the template whether these are set accordingly or are out of line.
- Determine the Panel Length
You also determine the length of the sheet piles before driving them into the soil. The length is based on several factors such as the condition of the soil. In general, the length of sheet piles can be from 25 to 45 feet long. Due to its mechanism, the sheets cannot be mixed or interchanged during the procedure.
Contact Us
If you want to use steel sheet piling in your upcoming construction project, then contact an expert to get quality sheet piles. You can also contact us at Bigfoot Pipe And Piling to purchase the best materials for your business.
