What is the main part of a structure that keeps the building strong? Yes, it is the foundation. This gives the building its standing strength and keeps it safe for a long time. Building every part of the structure nicely is very important under correct workplace conditions. It requires a place that has good water stability. This is where dewatering comes into effect. Dewatering is mainly done for sites that need to stay dry for the building of the foundation.
Proper dewatering pipes are installed in those dug areas to keep water from entering or leaking. It is sometimes seen that if there is a lot of water in the soil, it can wash the cement away. This will weaken your foundation, thus making the whole structure weak. This isn’t a straightforward job and requires expert hands to complete. Here in this article, we have discussed everything you need to know about dewatering.
Reasons Dewatering Is Done
It is essential to understand why dewatering is done in the first place. There are different methods present that require dewatering pipes to get the work completed. You have to realize that there is natural water stored underground. When you dig a place to a level, the water comes up.
You must know that the water table keeps pressuring the level of water to go up till it reaches the foundation. This can be very harmful for its construction, so water should be diverted from that place. This isn’t very easy to do as mud gets mixed with the water.
On the other hand, if the excess water is because of rain, it can be easily removed by dewatering pipes.
Exploring the Costly Methods of Dewatering
There are many different methods of dewatering, some of which are discussed below:
Chemical Consolidation- This is a dewatering method that is usually seen when smaller projects are in play. A good fusion of chemicals is used to throw out the muddy water from that area. This changes the state of the muddy soil from liquid to semi-liquid. Most of the time, the workers use soda or calcium chloride to harden the water. Before that, dewatering pipes are placed at the bottom; chemicals are forced into them to consolidate the water and get the job done.
Deep Wells- Most often, people do this when a lot of groundwater has to be removed. This type of construction needs the groundwater to be lower than it already is. In this method, the construction workers must first build a deep well, and then when it collects water, it is pumped out. This also requires you to have all the correct types of dewatering
pipes.
In-expensive Methods Used in Bigger Projects
Sump Pump- These pumps are used when the construction workers have to dewater the pit
of a foundation. Different size dewatering pipes are used to collect the subsoil water, which is later converted into a sump.
Cement Grouting- Cement is mixed with sand and soil, which is then inserted into the holes made in the ground. This makes the area around the foundation watertight.
Choose the Right Kind of Pipe
Now that you have an idea about dewatering, you can contact Bigfoot Pipe & Piling to order the pipes used in this. We are one of the leading suppliers of new, used, and surplus steel pipes and serves business workers hailing from a wide range of industries.
